
FILTERS
ACTERRA GROUP, INC.
800.289.7371
www.acterragroup.com
11
¾” Low Volume, Spin On Filters
The Cim-Tek 200E Spin-on Filters are
recommended for low-volume power pumps
and gravity-flow applications. The 250E Spin-
on Filter may be used with power pump units
or dispensers, low-volume power pumps,
gravity-flow applications, and low-volume
commercial applications. Ethanol blends or methanol
blends of 10% or less are compatible with the 200E and
250E Spin-on Filters; however, phase separation will not be
detected if it occurs.
Spin on filter w/ draincock
Spin on filter w/o draincock
Spin on filter w/ draincock
1” Low Volume, Spin on Filters
The Cim-Tek 200AE Spin-on Filters are
recommended for low-volume power pumps
and gravity- flow applications. The 250AE
Spin-on Filter may be used with power pump
units or dispensers, low-volume power pumps,
gravity- flow applications, and low-volume
commercial applications. Ethanol blends or methanol
blends of 10% or less are compatible with the 200AE and
250AE Spin-on filters; however, phase separation will not
be detected if it occurs.
Spin on filter w/ draincock
Spin on filter w/o draincock
Spin on filter w/ draincock
Spin On Filters for Ethanol Blends
The Cim-Tek 300M Filter Monitor for
Ethanol Blends are spin-on filters
developed to detect phase separation
in ethanol- gasoline blended fuels.
Ethanol blends of 10% or less are
filtered with a 10-micron medium for particulate
removal. The 300M and 300MGA will detect
the point where phase separation occurs and slow the flow
from the service station dispenser or pump to approximately
2 gpm/7.5 Ipm or less. (15 GPM max)
Spin-on w/ ethanol monitor
Spin On Filters for Ethanol Blends
The Cim-Tek 400M Filter Monitor for Ethanol
Blends are spin-on filters developed to detect
phase separation in ethanol- gasoline blended
fuels. Ethanol blends of 10% or less are
filtered with a nominal 10-micron medium for
particulate removal. The 400M & 400MGA, a filter monitor
combination, will detect the point where phase separation
occurs and slow the flow from the service station dispenser
or pump to approximately 2 gpm or less. (25 GPM max)
High Volume Spin On Filters
The Cim-Tek 800 Series Spin-on Filters are
designed for economical fuel filtration at service
station, truck stop, and commercial fueling
locations. Gasoline, diesel fuel, and fuel oils
are efficiently filtered with resin-impregnated
cellulose, high-performance microglass,
HYDROSORB® I, or HYDROSORB® II media.
Spin On Filters for Ethanol Blends
The Centurion I has a single filter housing with a
replaceable element for filtration of gasoline,
diesel fuel, and fuel oils. The Centurion I is
designed for service stations, truck stops, and
commercial high-speed dispensing applications.
A nominal 10-micron element is recommended
for gasoline and diesel fuels.
Filter housing & 1 element
Housing & Hydrosorb element
Housing & Hydrosorb element
Centurion replacement element
Centurion replacement element
Hydrosorb replacement element
Hydrosorb replacement element
Filter housing & 1 element
Filter Adaptors
Economical cast iron adaptors are
available in ¾” and 1” with the high
volume, aluminum adaptors are available
in 1”, 1-1/2” and 2” sizes.
Comentarios a estos manuales